Vous souhaitez réagir à ce message ? Créez un compte en quelques clics ou connectez-vous pour continuer.
-20%
Le deal à ne pas rater :
Pack Gigabyte Ecran PC Gamer 27″ LED M27Q (rev2.0) + Radeon RX 6950 ...
749 € 939 €
Voir le deal

2 participants

    GDM (Gnome Display Manager)

    Astro
    Astro
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 2
    Score Poing de Guthix: : 550000
    Messages : 1889
    Réputation : 691
    Date d'inscription : 17/10/2010
    Localisation : Dans l'immensité de l'espace

    Icone par Défaut GDM (Gnome Display Manager)

    Message par Astro Ven 17 Déc - 1:44

    Bon bah voilà pen, je veux récupérer les logs lorsque ça plante, donc met tout ceci dans un fichier vide (met le dans ton home) (et nomme le "gdmplante")

    Code:

    #!/bin/sh
    cp -a /var/log/errors.log /home/pierre/
    cp -a /var/log/Xorg.0.log /home/pierre/
    cp -a /var/log/messages.log /home/pierre/
    reboot

    ensuite dans un terminal fait:

    Code:

    cd
    chmod +x gdmplante
    sudo mv gdmplante /bin

    Bon et on est prêt. Lorsque gdm (l'écran de connexion) va planter, tu le log en tty (ctrl+alt+F1, fait gaffe au verrouillage num, c'est par parce que le voyant est allumé que ça fonctionne, désactive puis réactive verrouillage ça marchera)

    Entre ton pseudo, ton pass.

    Puis tape "gdmplante"

    Ça va te faire redémarrer et tu vas trouver 3 fichiers dans ton home: errors.log messages.log et Xorg.0.log. Post les 3 ici stp.
    Evil Pen
    Evil Pen
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 59
    Score Poing de Guthix: : 1800
    Messages : 1187
    Réputation : 548
    Date d'inscription : 16/10/2010
    Localisation : Dans les confints du néant

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Evil Pen Ven 17 Déc - 1:57

    OK, merci BEAUCOUP =]
    Sinon, je fais ça après le f35 large =)
    Evil Pen
    Evil Pen
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 59
    Score Poing de Guthix: : 1800
    Messages : 1187
    Réputation : 548
    Date d'inscription : 16/10/2010
    Localisation : Dans les confints du néant

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Evil Pen Ven 17 Déc - 5:40

    Voilà le contenu de Xorg.O.log, par contre j'arrive pas à chopper les autres. J'arrive pas à rentrer dans le mode console (avec ctrl + alt + f1) lorsque l'écran est noir, mais seulement lorsque l'écran de session est chargé.

    Sinon, le voilà :

    Code:

    [    17.115]
    X.Org X Server 1.9.0
    Release Date: 2010-08-20
    [    17.116] X Protocol Version 11, Revision 0
    [    17.116] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
    [    17.116] Current Operating System: Linux PC-Pierre 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 10:18:49 UTC 2010 i686
    [    17.116] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=5a03b0d5-358c-4ff8-848b-ba04a3528774 ro quiet splash
    [    17.116] Build Date: 16 September 2010  05:39:22PM
    [    17.116] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
    [    17.116] Current version of pixman: 0.18.4
    [    17.116]    Before reporting problems, check http://wiki.x.org
       to make sure that you have the latest version.
    [    17.116] Markers: (--) probed, (**) from config file, (==) default setting,
       (++) from command line, (!!) notice, (II) informational,
       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    17.116] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 17 17:30:10 2010
    [    17.116] (==) Using config file: "/etc/X11/xorg.conf"
    [    17.116] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    17.116] (==) No Layout section.  Using the first Screen section.
    [    17.116] (**) |-->Screen "Default Screen" (0)
    [    17.116] (**) |  |-->Monitor "<default monitor>"
    [    17.117] (==) No device specified for screen "Default Screen".
       Using the first device section listed.
    [    17.117] (**) |  |-->Device "Default Device"
    [    17.117] (==) No monitor specified for screen "Default Screen".
       Using a default monitor configuration.
    [    17.117] (==) Automatically adding devices
    [    17.117] (==) Automatically enabling devices
    [    17.117] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    17.117]    Entry deleted from font path.
    [    17.117] (==) FontPath set to:
       /usr/share/fonts/X11/misc,
       /usr/share/fonts/X11/100dpi/:unscaled,
       /usr/share/fonts/X11/75dpi/:unscaled,
       /usr/share/fonts/X11/Type1,
       /usr/share/fonts/X11/100dpi,
       /usr/share/fonts/X11/75dpi,
       /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
       built-ins
    [    17.117] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    17.117] (II) The server relies on udev to provide the list of input devices.
       If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    17.117] (II) Loader magic: 0x81f8e00
    [    17.117] (II) Module ABI versions:
    [    17.117]    X.Org ANSI C Emulation: 0.4
    [    17.117]    X.Org Video Driver: 8.0
    [    17.117]    X.Org XInput driver : 11.0
    [    17.117]    X.Org Server Extension : 4.0
    [    17.118] (--) PCI:*(0:1:5:0) 1002:9612:103c:30e3 rev 0, Mem @ 0x40000000/268435456, 0x56400000/65536, 0x56300000/1048576, I/O @ 0x00005000/256
    [    17.122] (II) Open ACPI successful (/var/run/acpid.socket)
    [    17.122] (II) "extmod" will be loaded by default.
    [    17.122] (II) "dbe" will be loaded by default.
    [    17.122] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [    17.122] (II) "record" will be loaded by default.
    [    17.122] (II) "dri" will be loaded by default.
    [    17.122] (II) "dri2" will be loaded by default.
    [    17.122] (II) LoadModule: "glx"
    [    17.122] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
    [    17.123] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
    [    17.123]    compiled for 7.6.0, module version = 1.0.0
    [    17.123] (II) Loading extension GLX
    [    17.123] (II) LoadModule: "extmod"
    [    17.154] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    17.154] (II) Module extmod: vendor="X.Org Foundation"
    [    17.154]    compiled for 1.9.0, module version = 1.0.0
    [    17.155]    Module class: X.Org Server Extension
    [    17.155]    ABI class: X.Org Server Extension, version 4.0
    [    17.155] (II) Loading extension MIT-SCREEN-SAVER
    [    17.155] (II) Loading extension XFree86-VidModeExtension
    [    17.155] (II) Loading extension XFree86-DGA
    [    17.155] (II) Loading extension DPMS
    [    17.155] (II) Loading extension XVideo
    [    17.155] (II) Loading extension XVideo-MotionCompensation
    [    17.155] (II) Loading extension X-Resource
    [    17.155] (II) LoadModule: "dbe"
    [    17.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    17.155] (II) Module dbe: vendor="X.Org Foundation"
    [    17.155]    compiled for 1.9.0, module version = 1.0.0
    [    17.155]    Module class: X.Org Server Extension
    [    17.155]    ABI class: X.Org Server Extension, version 4.0
    [    17.155] (II) Loading extension DOUBLE-BUFFER
    [    17.155] (II) LoadModule: "record"
    [    17.156] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    17.156] (II) Module record: vendor="X.Org Foundation"
    [    17.156]    compiled for 1.9.0, module version = 1.13.0
    [    17.156]    Module class: X.Org Server Extension
    [    17.156]    ABI class: X.Org Server Extension, version 4.0
    [    17.156] (II) Loading extension RECORD
    [    17.156] (II) LoadModule: "dri"
    [    17.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    17.157] (II) Module dri: vendor="X.Org Foundation"
    [    17.157]    compiled for 1.9.0, module version = 1.0.0
    [    17.157]    ABI class: X.Org Server Extension, version 4.0
    [    17.157] (II) Loading extension XFree86-DRI
    [    17.157] (II) LoadModule: "dri2"
    [    17.157] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    17.157] (II) Module dri2: vendor="X.Org Foundation"
    [    17.157]    compiled for 1.9.0, module version = 1.2.0
    [    17.157]    ABI class: X.Org Server Extension, version 4.0
    [    17.157] (II) Loading extension DRI2
    [    17.157] (II) LoadModule: "fglrx"
    [    17.157] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
    [    17.199] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [    17.200]    compiled for 1.4.99.906, module version = 8.78.30
    [    17.200]    Module class: X.Org Video Driver
    [    17.200] (II) Loading sub module "fglrxdrm"
    [    17.200] (II) LoadModule: "fglrxdrm"
    [    17.200] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    17.200] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    17.200]    compiled for 1.8.99.905, module version = 8.78.30
    [    17.201] (II) ATI Proprietary Linux Driver Version Identifier:8.78.30
    [    17.201] (II) ATI Proprietary Linux Driver Release Identifier: 8.78.3                             
    [    17.201] (II) ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:30:49
    [    17.201] (++) using VT number 7

    [    17.207] (WW) Falling back to old probe method for fglrx
    [    17.224] (II) Loading PCS database from /etc/ati/amdpcsdb
    [    17.225] (--) Assigning device section with no busID to primary device
    [    17.225] (--) Chipset Supported AMD Graphics Processor (0x9612) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [    17.225] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [    17.225] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [    17.225] (II) AMD Video driver is signed
    [    17.225] (II) fglrx(0): pEnt->device->identifier=0x86b95b0
    [    17.225] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
    [    17.226] (II) Loading sub module "vgahw"
    [    17.226] (II) LoadModule: "vgahw"
    [    17.229] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [    17.229] (II) Module vgahw: vendor="X.Org Foundation"
    [    17.229]    compiled for 1.9.0, module version = 0.1.0
    [    17.229]    ABI class: X.Org Video Driver, version 8.0
    [    17.229] (II) fglrx(0): Creating default Display subsection in Screen section
       "Default Screen" for depth/fbbpp 24/32
    [    17.229] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [    17.229] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    17.229] (==) fglrx(0): Default visual is TrueColor
    [    17.229] (==) fglrx(0): RGB weight 888
    [    17.229] (II) fglrx(0): Using 8 bits per RGB
    [    17.229] (==) fglrx(0): Buffer Tiling is ON
    [    17.229] (II) Loading sub module "fglrxdrm"
    [    17.229] (II) LoadModule: "fglrxdrm"
    [    17.229] (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    17.234] ukiDynamicMajor: found major device number 249
    [    17.234] ukiDynamicMajor: found major device number 249
    [    17.234] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    17.234] ukiOpenDevice: node name is /dev/ati/card0
    [    17.234] ukiOpenDevice: open result is 11, (OK)
    [    17.234] ukiOpenByBusid: ukiOpenMinor returns 11
    [    17.234] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    17.235] (==) fglrx(0): NoAccel = NO
    [    17.235] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
    [    17.235] (--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset = 0x9612)
    [    17.235] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30e3)
    [    17.235] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [    17.235] (--) fglrx(0): Linear framebuffer (phys) at 0x40000000
    [    17.235] (--) fglrx(0): MMIO registers at 0x56400000
    [    17.235] (--) fglrx(0): I/O port at 0x00005000
    [    17.235] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [    17.836] (II) fglrx(0): AC Adapter is used
    [    17.839] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [    17.902] (II) Loading sub module "vbe"
    [    17.902] (II) LoadModule: "vbe"
    [    17.903] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [    17.903] (II) Module vbe: vendor="X.Org Foundation"
    [    17.903]    compiled for 1.9.0, module version = 1.1.0
    [    17.903]    ABI class: X.Org Video Driver, version 8.0
    [    17.903] (II) fglrx(0): VESA BIOS detected
    [    17.903] (II) fglrx(0): VESA VBE Version 3.0
    [    17.903] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [    17.903] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    [    17.903] (II) fglrx(0): VESA VBE OEM Software Rev: 10.92
    [    17.903] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    [    17.903] (II) fglrx(0): VESA VBE OEM Product: RS780M
    [    17.903] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [    17.915] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [    17.915] (II) fglrx(0): UMA/SP interleave mode is enabled in the BIOS
    [    17.915] (--) fglrx(0): Video RAM: 294912 kByte, Type: DDR2
    [    17.915] (II) fglrx(0): PCIE card detected
    [    17.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [    17.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [    17.917] (II) fglrx(0): Using adapter: 1:5.0.
    [    17.925] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x12000000)
    [    17.983] (II) fglrx(0): Interrupt handler installed at IRQ 18.
    [    17.984] (II) fglrx(0): RandR 1.2 support is enabled!
    [    17.984] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [    17.984] (==) fglrx(0): Center Mode is disabled
    [    17.984] (II) Loading sub module "fb"
    [    17.984] (II) LoadModule: "fb"
    [    17.985] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    17.985] (II) Module fb: vendor="X.Org Foundation"
    [    17.985]    compiled for 1.9.0, module version = 1.0.0
    [    17.985]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    17.985] (==) fglrx(0): Active stereo disabled
    [    17.985] (II) Loading sub module "ddc"
    [    17.985] (II) LoadModule: "ddc"
    [    17.985] (II) Module "ddc" already built-in
    [    18.415] (II) fglrx(0): Finished Initialize PPLIB!
    [    18.419] (II) fglrx(0): Output LVDS has no monitor section
    [    18.419] (II) fglrx(0): Output DFP1 has no monitor section
    [    18.419] (II) fglrx(0): Output CRT1 has no monitor section
    [    18.419] (II) fglrx(0): Output TV has no monitor section
    [    18.419] (II) fglrx(0): Output CV has no monitor section
    [    18.419] (II) Loading sub module "ddc"
    [    18.419] (II) LoadModule: "ddc"
    [    18.419] (II) Module "ddc" already built-in
    [    18.419] (II) fglrx(0): Connected Display0: LVDS
    [    18.419] (II) fglrx(0): Display0 EDID data ---------------------------
    [    18.419] (II) fglrx(0): Manufacturer: SEC  Model: 4f45  Serial#: 0
    [    18.419] (II) fglrx(0): Year: 2008  Week: 0
    [    18.419] (II) fglrx(0): EDID Version: 1.3
    [    18.419] (II) fglrx(0): Digital Display Input
    [    18.419] (II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
    [    18.419] (II) fglrx(0): Gamma: 2.20
    [    18.419] (II) fglrx(0): No DPMS capabilities specified
    [    18.419] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [    18.419] (II) fglrx(0): First detailed timing is preferred mode
    [    18.419] (II) fglrx(0): redX: 0.580 redY: 0.340  greenX: 0.310 greenY: 0.550
    [    18.419] (II) fglrx(0): blueX: 0.155 blueY: 0.155  whiteX: 0.313 whiteY: 0.329
    [    18.419] (II) fglrx(0): Manufacturer's mask: 0
    [    18.419] (II) fglrx(0): Supported detailed timing:
    [    18.419] (II) fglrx(0): clock: 69.3 MHz  Image Size:  331 x 207 mm
    [    18.419] (II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1416 h_border: 0
    [    18.419] (II) fglrx(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
    [    18.419] (II) fglrx(0): Unknown vendor-specific block f
    [    18.419] (II) fglrx(0):  SAMSUNG
    [    18.419] (II) fglrx(0):  154AT07-301
    [    18.419] (II) fglrx(0): EDID (in hex):
    [    18.419] (II) fglrx(0):    00ffffffffffff004ca3454f00000000
    [    18.419] (II) fglrx(0):    00120103802115780a87f594574f8c27
    [    18.420] (II) fglrx(0):    27505400000001010101010101010101
    [    18.420] (II) fglrx(0):    010101010101121b0088502010301030
    [    18.420] (II) fglrx(0):    13004bcf100000190000000f00000000
    [    18.420] (II) fglrx(0):    00000000002387026400000000fe0053
    [    18.420] (II) fglrx(0):    414d53554e470a2020202020000000fe
    [    18.420] (II) fglrx(0):    00313534415430372d333031200a0092
    [    18.420] (II) fglrx(0): End of Display0 EDID data --------------------
    [    18.645] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    18.646] (II) fglrx(0): Printing DDC gathered Modelines:
    [    18.646] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    18.646] (II) fglrx(0): Output LVDS connected
    [    18.646] (II) fglrx(0): Output DFP1 disconnected
    [    18.646] (II) fglrx(0): Output CRT1 disconnected
    [    18.646] (II) fglrx(0): Output TV disconnected
    [    18.646] (II) fglrx(0): Output CV disconnected
    [    18.646] (II) fglrx(0): Using exact sizes for initial modes
    [    18.646] (II) fglrx(0): Output LVDS using initial mode 1280x800
    [    18.646] (II) fglrx(0): Display dimensions: (330, 210) mm
    [    18.646] (II) fglrx(0): DPI set to (98, 96)
    [    18.646] (II) fglrx(0): Adapter ATI Radeon HD 3200 Graphics  has 2 configurable heads and 1 displays connected.
    [    18.646] (==) fglrx(0):  PseudoColor visuals disabled
    [    18.646] (II) Loading sub module "ramdac"
    [    18.646] (II) LoadModule: "ramdac"
    [    18.646] (II) Module "ramdac" already built-in
    [    18.646] (==) fglrx(0): NoDRI = NO
    [    18.646] (==) fglrx(0): Capabilities: 0x00000000
    [    18.646] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [    18.646] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [    18.646] (==) fglrx(0): UseFastTLS=0
    [    18.646] (==) fglrx(0): BlockSignalsOnLock=1
    [    18.646] (--) Depth 24 pixmap format is 32 bpp
    [    18.647] (II) Loading extension ATIFGLRXDRI
    [    18.647] (II) fglrx(0): doing swlDriScreenInit
    [    18.647] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [    18.647] ukiDynamicMajor: found major device number 249
    [    18.647] ukiDynamicMajor: found major device number 249
    [    18.647] ukiDynamicMajor: found major device number 249
    [    18.647] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    18.647] ukiOpenDevice: node name is /dev/ati/card0
    [    18.647] ukiOpenDevice: open result is 17, (OK)
    [    18.647] ukiOpenByBusid: ukiOpenMinor returns 17
    [    18.647] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    18.647] (II) fglrx(0): [uki] DRM interface version 1.0
    [    18.647] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:5:0"
    [    18.647] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [    18.647] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb787a000
    [    18.647] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [    18.647] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [    18.647] (II) fglrx(0): swlDriScreenInit done
    [    18.647] (II) fglrx(0): Kernel Module Version Information:
    [    18.647] (II) fglrx(0):    Name: fglrx
    [    18.647] (II) fglrx(0):    Version: 8.78.30
    [    18.647] (II) fglrx(0):    Date: Sep 20 2010
    [    18.647] (II) fglrx(0):    Desc: ATI FireGL DRM kernel module
    [    18.647] (II) fglrx(0): Kernel Module version matches driver.
    [    18.647] (II) fglrx(0): Kernel Module Build Time Information:
    [    18.647] (II) fglrx(0):    Build-Kernel UTS_RELEASE:        2.6.35-23-generic
    [    18.647] (II) fglrx(0):    Build-Kernel MODVERSIONS:        yes
    [    18.647] (II) fglrx(0):    Build-Kernel __SMP__:            yes
    [    18.647] (II) fglrx(0):    Build-Kernel PAGE_SIZE:          0x1000
    [    18.647] (II) fglrx(0): [uki] register handle = 0x00004000
    [    18.670] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
    [    18.670] (II) fglrx(0): DRI initialization successfull
    [    18.670] (II) fglrx(0): FBADPhys: 0xd0f53000 FBMappedSize: 0x010a8000
    [    18.670] (II) fglrx(0): Reserved 0x01200000 bytes of sideport memory for power saving
    [    18.670] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
    [    18.670] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
    [    18.670] (II) fglrx(0): Largest offscreen area available: 1664 x 960
    [    18.670] (==) fglrx(0): Backing store disabled
    [    18.670] (II) Loading extension FGLRXEXTENSION
    [    18.670] (==) fglrx(0): DPMS enabled
    [    18.671] (II) fglrx(0): Initialized in-driver Xinerama extension
    [    18.671] (**) fglrx(0): Textured Video is enabled.
    [    18.671] (II) LoadModule: "glesx"
    [    18.671] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
    [    18.673] (II) Module glesx: vendor="X.Org Foundation"
    [    18.673]    compiled for 1.8.99.905, module version = 1.0.0
    [    18.673] (II) Loading extension GLESX
    [    18.673] (II) fglrx(0): GLESX enableFlags = 528
    [    18.673] (II) fglrx(0): GLESX is enabled
    [    18.673] (II) fglrx(0): Acceleration enabled
    [    18.673] (II) LoadModule: "amdxmm"
    [    18.673] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
    [    18.673] (II) Module amdxmm: vendor="X.Org Foundation"
    [    18.673]    compiled for 1.8.99.905, module version = 1.0.0
    [    18.673] (II) Loading extension AMDXVOPL
    [    18.675] (II) fglrx(0): UVD2 feature is available
    [    18.678] (II) fglrx(0): Enable composite support successfully
    [    18.678] (II) fglrx(0): X context handle = 0x1
    [    18.678] (II) fglrx(0): [DRI] installation complete
    [    18.678] (==) fglrx(0): Silken mouse enabled
    [    18.678] (==) fglrx(0): Using HW cursor of display infrastructure!
    [    18.678] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [    18.678] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
    [    18.678] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
    [    18.681] (WW) fglrx(0): Unknown ConnectorType: 0!
    [    18.681] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
    [    18.682] (II) fglrx(0): Cannot set TV horizontal size.
    [    18.682] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
    [    18.682] (II) fglrx(0): Cannot set TV horizontal position.
    [    18.682] (II) fglrx(0): Cannot set TV vertical position.
    [    19.214] (--) RandR disabled
    [    19.214] (II) Initializing built-in extension Generic Event Extension
    [    19.214] (II) Initializing built-in extension SHAPE
    [    19.214] (II) Initializing built-in extension MIT-SHM
    [    19.214] (II) Initializing built-in extension XInputExtension
    [    19.214] (II) Initializing built-in extension XTEST
    [    19.214] (II) Initializing built-in extension BIG-REQUESTS
    [    19.214] (II) Initializing built-in extension SYNC
    [    19.214] (II) Initializing built-in extension XKEYBOARD
    [    19.214] (II) Initializing built-in extension XC-MISC
    [    19.214] (II) Initializing built-in extension SECURITY
    [    19.214] (II) Initializing built-in extension XINERAMA
    [    19.214] (II) Initializing built-in extension XFIXES
    [    19.214] (II) Initializing built-in extension RENDER
    [    19.214] (II) Initializing built-in extension RANDR
    [    19.215] (II) Initializing built-in extension COMPOSITE
    [    19.215] (II) Initializing built-in extension DAMAGE
    [    19.215] (II) Initializing built-in extension GESTURE
    [    19.240] ukiDynamicMajor: found major device number 249
    [    19.240] ukiDynamicMajor: found major device number 249
    [    19.240] ukiOpenByBusid: Searching for BusID PCI:1:5:0
    [    19.240] ukiOpenDevice: node name is /dev/ati/card0
    [    19.240] ukiOpenDevice: open result is 18, (OK)
    [    19.240] ukiOpenByBusid: ukiOpenMinor returns 18
    [    19.240] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
    [    19.345] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    [    19.345] (II) GLX: Initialized DRI GL provider for screen 0
    [    19.346] (II) fglrx(0): Enable the clock gating!
    [    19.346] (II) fglrx(0): Setting screen physical size to 338 x 211
    [    19.374] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [    19.385] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [    19.385] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    19.385] (II) LoadModule: "evdev"
    [    19.386] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    19.386] (II) Module evdev: vendor="X.Org Foundation"
    [    19.386]    compiled for 1.9.0, module version = 2.3.2
    [    19.386]    Module class: X.Org XInput Driver
    [    19.386]    ABI class: X.Org XInput driver, version 11.0
    [    19.386] (**) Power Button: always reports core events
    [    19.386] (**) Power Button: Device: "/dev/input/event2"
    [    19.386] (II) Power Button: Found keys
    [    19.386] (II) Power Button: Configuring as keyboard
    [    19.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    19.386] (**) Option "xkb_rules" "evdev"
    [    19.386] (**) Option "xkb_model" "evdev"
    [    19.386] (**) Option "xkb_layout" "fr"
    [    19.386] (**) Option "xkb_variant" "oss"
    [    19.389] (II) XKB: reuse xkmfile /var/lib/xkb/server-03B9BA61C8A1BA78B8E8368594E484A532C88FC7.xkm
    [    19.391] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [    19.391] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    19.391] (**) Video Bus: always reports core events
    [    19.391] (**) Video Bus: Device: "/dev/input/event5"
    [    19.391] (II) Video Bus: Found keys
    [    19.391] (II) Video Bus: Configuring as keyboard
    [    19.391] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [    19.391] (**) Option "xkb_rules" "evdev"
    [    19.391] (**) Option "xkb_model" "evdev"
    [    19.391] (**) Option "xkb_layout" "fr"
    [    19.391] (**) Option "xkb_variant" "oss"
    [    19.393] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [    19.393] (II) No input driver/identifier specified (ignoring)
    [    19.393] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
    [    19.393] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    19.393] (**) Sleep Button: always reports core events
    [    19.393] (**) Sleep Button: Device: "/dev/input/event0"
    [    19.393] (II) Sleep Button: Found keys
    [    19.393] (II) Sleep Button: Configuring as keyboard
    [    19.393] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [    19.393] (**) Option "xkb_rules" "evdev"
    [    19.393] (**) Option "xkb_model" "evdev"
    [    19.393] (**) Option "xkb_layout" "fr"
    [    19.393] (**) Option "xkb_variant" "oss"
    [    19.397] (II) config/udev: Adding input device Primax Electronics Apple Optical USB Mouse (/dev/input/event4)
    [    19.397] (**) Primax Electronics Apple Optical USB Mouse: Applying InputClass "evdev pointer catchall"
    [    19.397] (**) Primax Electronics Apple Optical USB Mouse: always reports core events
    [    19.397] (**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event4"
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: Found relative axes
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
    [    19.397] (**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
    [    19.397] (**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    19.397] (II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
    [    19.397] (II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
    [    19.398] (II) config/udev: Adding input device Primax Electronics Apple Optical USB Mouse (/dev/input/mouse0)
    [    19.398] (II) No input driver/identifier specified (ignoring)
    [    19.400] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
    [    19.400] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    19.401] (**) AT Translated Set 2 keyboard: always reports core events
    [    19.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
    [    19.401] (II) AT Translated Set 2 keyboard: Found keys
    [    19.401] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [    19.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [    19.401] (**) Option "xkb_rules" "evdev"
    [    19.401] (**) Option "xkb_model" "evdev"
    [    19.401] (**) Option "xkb_layout" "fr"
    [    19.401] (**) Option "xkb_variant" "oss"
    [    19.401] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [    19.401] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [    19.401] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [    19.401] (II) LoadModule: "synaptics"
    [    19.402] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    19.402] (II) Module synaptics: vendor="X.Org Foundation"
    [    19.402]    compiled for 1.9.0, module version = 1.2.2
    [    19.402]    Module class: X.Org XInput Driver
    [    19.402]    ABI class: X.Org XInput driver, version 11.0
    [    19.402] (II) Synaptics touchpad driver version 1.2.2
    [    19.402] (**) Option "Device" "/dev/input/event8"
    [    19.402] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5560
    [    19.402] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4778
    [    19.402] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [    19.402] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [    19.402] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [    19.402] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [    19.402] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [    19.402] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [    19.403] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [    19.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [    19.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [    19.403] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [    19.403] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [    19.403] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [    19.403] (II) No input driver/identifier specified (ignoring)
    [    19.403] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
    [    19.403] (II) No input driver/identifier specified (ignoring)
    [    19.404] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [    19.404] (II) No input driver/identifier specified (ignoring)
    [    19.407] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
    [    19.407] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [    19.407] (**) HP WMI hotkeys: always reports core events
    [    19.407] (**) HP WMI hotkeys: Device: "/dev/input/event7"
    [    19.408] (II) HP WMI hotkeys: Found keys
    [    19.408] (II) HP WMI hotkeys: Configuring as keyboard
    [    19.408] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
    [    19.408] (**) Option "xkb_rules" "evdev"
    [    19.408] (**) Option "xkb_model" "evdev"
    [    19.408] (**) Option "xkb_layout" "fr"
    [    19.408] (**) Option "xkb_variant" "oss"
    [    19.463] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [    19.816] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    19.816] (II) fglrx(0): Printing DDC gathered Modelines:
    [    19.816] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    19.977] (WW) fglrx(0): Cannot get updated TV attributes.
    [    19.978] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    19.978] (II) fglrx(0): Printing DDC gathered Modelines:
    [    19.978] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    20.139] (WW) fglrx(0): Cannot get updated TV attributes.
    [    20.150] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    20.150] (II) fglrx(0): Printing DDC gathered Modelines:
    [    20.150] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    20.311] (WW) fglrx(0): Cannot get updated TV attributes.
    [    20.312] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    20.312] (II) fglrx(0): Printing DDC gathered Modelines:
    [    20.312] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    20.472] (WW) fglrx(0): Cannot get updated TV attributes.
    [    23.892] (II) fglrx(0): Preparing normal LeaveVT...
    [    24.146] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    24.148] (II) fglrx(0): Backup framebuffer data.
    [    24.149] (II) fglrx(0): Backup complete.
    [    75.997] (II) fglrx(0): Preparing normal EnterVT...
    [    76.002] (II) Open ACPI successful (/var/run/acpid.socket)
    [    76.002] (II) AIGLX: Resuming AIGLX clients after VT switch
    [    76.831] (II) fglrx(0): UVD2 feature is available
    [    77.108] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [    77.108] (II) fglrx(0): Hot-plug event occurs on device: 1:5:0
    [    77.254] (II) Power Button: Device reopened after 1 attempts.
    [    77.254] (II) Video Bus: Device reopened after 1 attempts.
    [    77.254] (II) Sleep Button: Device reopened after 1 attempts.
    [    77.254] (II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
    [    77.255] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    [    77.255] (II) HP WMI hotkeys: Device reopened after 1 attempts.
    [    93.648] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    93.648] (II) fglrx(0): Printing DDC gathered Modelines:
    [    93.649] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    93.823] (WW) fglrx(0): Cannot get updated TV attributes.
    [    93.827] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    93.827] (II) fglrx(0): Printing DDC gathered Modelines:
    [    93.827] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    93.987] (WW) fglrx(0): Cannot get updated TV attributes.
    [    93.988] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    93.988] (II) fglrx(0): Printing DDC gathered Modelines:
    [    93.988] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    94.148] (WW) fglrx(0): Cannot get updated TV attributes.
    [    94.256] (WW) fglrx(0): Cannot get updated TV attributes.
    [    96.735] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    96.735] (II) fglrx(0): Printing DDC gathered Modelines:
    [    96.735] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    99.473] (II) fglrx(0): EDID vendor "SEC", prod id 20293
    [    99.473] (II) fglrx(0): Printing DDC gathered Modelines:
    [    99.473] (II) fglrx(0): Modeline "1280x800"x0.0  69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
    [    99.705] (WW) fglrx(0): Cannot get updated TV attributes.
    [  124.413] (II) fglrx(0): Preparing normal LeaveVT...
    [  124.440] (II) AIGLX: Suspending AIGLX clients for VT switch
    [  124.440] (II) fglrx(0): Backup framebuffer data.
    [  124.527] (II) fglrx(0): Backup complete.
    Astro
    Astro
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 2
    Score Poing de Guthix: : 550000
    Messages : 1889
    Réputation : 691
    Date d'inscription : 17/10/2010
    Localisation : Dans l'immensité de l'espace

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Astro Lun 20 Déc - 2:59

    Ah là le problème est plus grave que je ne pensais, les tty ne sont pas lancés...

    C'est Ubuntu qui marche pas, pas un logiciel tiers (je pensais à X au début)

    Donc là je peux pas t'aider je connais pas trop (plus en fait) Ubuntu :/

    Enfin sinon, on peut toujours voir les messages d'erreur, quand tu démarres ton ordi, tu as le splash je suppose, un écran graphique quoi qui s'affiche et fait patienter, bah on va virer ça.

    Édite le fichier /boot/grub/grub.cfg et vire tous les "quiet" et "splash" que tu vois, enregistre.

    T'inquiète gdm se lancera "noralement".

    Quand justement il ne se lancera pas, note les éventuelles erreurs que tu verras apparaître.

    Note: Sans le splash le démarrage d'Ubuntu c'est moche Smile
    Evil Pen
    Evil Pen
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 59
    Score Poing de Guthix: : 1800
    Messages : 1187
    Réputation : 548
    Date d'inscription : 16/10/2010
    Localisation : Dans les confints du néant

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Evil Pen Mar 21 Déc - 1:41

    Ok, merci. Je vais faire ça tout de suite.
    Sinon, au démarrage, avant l'écran "ubuntu" (qui est super moche, mis-console mis-graphique), y'a un message d'erreur :

    Cannot reserve MMIO region

    ...avec des signes avant.

    Voilà, si ça peut t'aider...
    Pen
    Astro
    Astro
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 2
    Score Poing de Guthix: : 550000
    Messages : 1889
    Réputation : 691
    Date d'inscription : 17/10/2010
    Localisation : Dans l'immensité de l'espace

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Astro Mar 21 Déc - 2:50

    J'ai regardé et apparemment ton erreur c'est pas très important ça peut même être ignoré.

    Enfin quand ça "plante" attend pour voir. Attends 5 minutes et si ça n'a pas changé redémarre.

    Sinon comment ça tu n'arrives pas à les enlever ? Tu as édité en root ?
    Evil Pen
    Evil Pen
    Organisateur
    Organisateur


    Niveau en Création de Rune: : 59
    Score Poing de Guthix: : 1800
    Messages : 1187
    Réputation : 548
    Date d'inscription : 16/10/2010
    Localisation : Dans les confints du néant

    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Evil Pen Mar 21 Déc - 6:26

    Bah comment j'entre en root ?

    Contenu sponsorisé


    Icone par Défaut Re: GDM (Gnome Display Manager)

    Message par Contenu sponsorisé


      La date/heure actuelle est Jeu 28 Mar - 12:58